
Power Your Home with Confidence: Introducing the BLUETTI Home Battery Backup
Beginning in the year 2020, BLUETTI has been implementing a project called LAAF (Lighting An African Family) in Kenya, which is located in Africa. They provide African families that do not have access to energy with lights and power generators.
Home Battery Backup
In the realm of emergency power generators for the house, a bold new era has dawned. You may become less reliant on the power grid with the assistance of the BLUETTI solar powered generator for your home, which also offers backup protection for your property.
BLUETTI AC500 + B300S Home Battery Backup
The modular power system AC500 & B300S will change the way you use solar power forever. It’s made to keep you powered up and connected during blackouts, no matter where you end up.
The AC500’s adaptable architecture allows for the addition of up to 6 additional B300S or 4 additional B300 batteries (or a combination of B300 and B300S) to increase its total capacity to 18,432Wh or 12,288Wh, respectively, providing you with enough juice to survive for days without access to grid power. The 5,000W inverter included in the AC500 means that AC300 owners who want a more powerful inverter won’t have to buy a new package. Everything you connect into it will work at top efficiency thanks to the inverter’s 5,000W of continuous pure sine wave output and its ability to handle a 10kW surge for a short period of time. It may be used anywhere, from a backyard BBQ to a camping trip.
It only takes roughly 1.5 hours* to fully charge an AC500+B300S combination because to the AC500’s efficient MPPT controller, which allows for a solar input of up to 3,000W (40 percent faster than the typical charging speed).The estimated charging time is based on perfect conditions and is provided as a guideline only. Conditions such as temperature might affect how long it takes to fully charge a device. The AC500 system may be charged in a variety of ways, including by plugging it into the sun, a car’s lighter, or a 5,000W charging cable*. The AC500’s ability to accept input at a maximum of 8,000W* means that it can be fully recharged in under 1.5 hours. * A 50A charging cable or grid connection is required. Use a combination of 3,000 watts of solar and 5,000 watts of AC to charge at least two B300S packs. Or else the input rate would be capped at 4,500W if only a single B300 were used.
In the event of a power outage or grid failure, the AC500 system will seamlessly take over as your primary home energy supply. To further assure safe operation, extended battery life, and peak performance, it uses a cutting-edge Battery Management System (BMS) and LiFePO4 battery. Easily manage power input/output, real-time power consumption, charging profiles, over-the-air firmware updates, and more with the BLUETTI App and touchscreen interface.
- 5,000W Rated Power (10,000W Surge)
- 3,072Wh~18,432Wh Expandable Capacity
- LiFePO4 Battery With 3,500+ Life Cycles to 80%
- Smart APP Control (WiFi & Bluetooth Connection).
- 6 Ways to Recharge (AC/Solar/Car/Generator/Lead battery/Dual charging(Dual AC/AC+Solar)).
- 16 Versatile Outlets for 99% Devices.
- Tie to Home Grid for 24/7 UPS
- 4-Year Warranty for AC500 & B300S, 1-year for accessories.
BLUETTI EP500Pro Power Station | 3,000W 5,100Wh
The BLUETTI EP500Pro comes standard with a 3000W rated pure sine wave AC inverter and an innovative 5100Wh LiFePO4 battery pack. You can run your entire party, family camping vacation, cabin workshops, or even your full house for two days on the power provided by this industry-leading power station. With as many as 14 available outlets, you can easily charge your electric vehicle and run your air conditioner at the same time.
The EP500Pro has superior reliability and safety thanks to its cutting-edge Battery Management System and LiFePO4 chemistry. The EP500Pro’s firmware can be updated over the web thanks to the device’s built-in dual-core microcomputer and network connectivity. One may always do better; there is no “best.”
When the power goes out, the EP500Pro will switch over to powering your home’s necessary loads automatically. Unlike gasoline generators, the BLUETTI EP500Pro requires no fuel, produces no carbon monoxide, and is silent. Combine with a solar input of up to 1200W MPPT to maintain power to your appliances while recharging the inbuilt battery quickly. Do you recall the days when power outages were a real concern? Stop worrying; the BLUETTI EP500Pro has arrived.
- 5100Wh LiFePO4, 3500+Charge Cycle
- EP500Pro: 3000W Pure Sine Wave Output
- Movable Power Station
- In-grid UPS Mode&Flexible UPS Mode(24/7)
- Off-grid Energy Storage
- Multiple Devices Can Be Loaded Simultaneously
- Flexible Recharging Way To Keep Your EP500Pro Always On
- App Remote Control
- Smart Touchscreen
BLUETTI EP500Pro + B300 Home Battery Backup
The BLUETTI EP500Pro comes with a 3000W pure sine wave AC inverter and a 5100Wh LiFePO4 battery pack, all of which are industry firsts. In the case of an electrical blackout, this top-of-the-line power plant can keep your home and all of its appliances running for at least two days. Powering everything from laptops and air conditioners to electric vehicles is a breeze thanks to the up to 14 available plug sources.
The EP500Pro is exceptionally reliable since it has a cutting-edge Battery Management System and LiFePO4 chemistry. The EP500Pro has a built-in dual-core microcomputer and an Internet connection, so you can update the firmware via the web. When it comes to quality, there is no “best,” only “better.”
In the event of a power outage, the EP500Pro will seamlessly take over as your primary household energy source for vital appliances. The BLUETTI EP500Pro is a silent, clean, and maintenance-free alternative to noisy gasoline generators that can power your home’s lighting and other devices. Use in tandem with a solar input of up to 1200W MPPT to maintain appliance power without draining the boat’s battery. When did you last experience a power outage? Put your mind at ease; please meet BLUETTI EP500Pro.
- 5100Wh LiFePO4, 3500+Charge Cycle
- EP500Pro: 3000W Pure Sine Wave Output
- Movable Power Station
- In-grid UPS Mode&Flexible UPS Mode(24/7)
- Off-grid Energy Storage
- Multiple Devices Can Be Loaded Simultaneously
- Flexible Recharging Way To Keep Your EP500Pro Always On
- App Remote Control
- Smart Touchscreen
BLUETTI AC200MAX + B230 Home Battery Backup
The first BLUETTI power plant that is extensible and modifiable. The AC200MAX can serve as your mobile charging station whether you are off the grid or just traveling because it is equipped with an incredible 2048Wh of ultra-durable LFP cells as well as a 2,200W full power pure sine wave inverter.
Are you having trouble striking a balance between power and flexibility? They’ve got you taken care of! The AC200MAX is equipped with two expansion connectors, allowing it to accommodate up to two BLUETTI B230’s (2048Wh each) or B300’s (3072Wh each) battery modules. When these modules are connected, the overall capacity may be increased to an astounding 8192Wh!
- 2,200W AC Pure Sine Wave Inverter (4,800W Surge).
- 2,048Wh Capacity.
- LiFePO4 Battery with 3,500+ Life Cycles to 80%
- Expandable Up To 6,144Wh with 2×B230, or 8,192Wh with 2×B300
- 7 Ways to Recharge (AC/Solar/Car/Generator/Lead Battery/Dual AC/AC+Solar)
- 900W Max. Solar Input
- 1300W Max. Fast Dual Charging (Solar + AC Adapter)
- Smart Control & Monitor in BLUETTI App